| Flagg Coal Company 75 | |
|---|---|
| Flagg Coal at Train Festival 2009 in Owosso, Michigan | |
| Power type | Steam |
| Builder | Vulcan Iron Works, Wilkes Barre, PA |
| Serial number | 3972 |
| Build date | December 1930 |
| Configuration | 0-4-0ST |
| UIC classification | B |
| Gauge | 4 ft 8 1⁄2 in (1,435 mm) |
| Driver diameter | 38 in (965 mm) |
| Weight on drivers | 82,000 lb (37.2 metric tons) |
| Locomotive weight | 82,000 lb (37.2 metric tons) |
| Fuel type | Coal |
| Boiler pressure | 150 lbf/in² (1.03 MPa) |
| Cylinders | Two, outside |
| Cylinder size | 14 × 22 in (356 × 559 mm) |
| Valve type | Slide valves |
| Tractive effort | 18,325 lbf (81.51 kN) |
| Career | Flagg Coal Company, Solvay Process Quarry |
| Number | FCC 2, Solvay Process Quarry 75 |
| Locale | Michigan |
| Retired | 1954 |
| Restored | 1991–2001 |
| Current owner | John and Byron Gramling |
| Disposition | Runs daily train rides and occasional excursions. |
Flagg Coal Company 75 is a 0-4-0 saddletank steam locomotive built for the Flagg Coal Company in 1930. Restored and owned by John and Byron Gramling, the engine was loaned in 2002 to the Steam Railroading Institute where it is used for demonstrations and for powering train rides and excursions. Originally numbered Flagg Coal Company 2, the locomotive's number was changed to 75 when it was sold to the Solvay Process Quarry in 1935. It never actually wore "Flagg Coal Company 75" during its service life.
Contents |
FCC 75 went into service in December of 1930 as #2 for the Flagg Coal Company of Avoca, Pennsylvania where it was used as a switch engine. In 1935 it was sold to the Solvay Process Co. in Jamesville, New York and renumbered 75. It was then used to push 4-wheel hopper cars from the steam shovel to the crusher at the rock quarry. In the early 1950s the Solvay Process Co. replaced the 0-4-0s like # 75 with trucks and dieselized the handling of finished crushed stone with two GE 80 tonners, #5 and #6. (#6 now belongs to the Central NY Chapter, NRHS along with former Solvay Process Co. Alco 0-4-0 # 53). In 1954, #75 and twelve other locomotives were sold to Dr. Groman and his planned Rail City Museum in Sandy Pond, New York. The locomotive sat there untouched until 1991 when John and Byron Gramling purchased it with the intent to restore it to operating condition. The father-son duo painstakingly disassembled the locomotive, moved it to their shop in Ashley, Indiana and over the course of the following ten years returned it to service. In 2002 John and Byron loaned the locomotive to the Steam Railroading Institute where it is used for demonstrations and to power steam excursions.
Flagg Coal Company 75 has traveled around the country to operate, give demonstrations and educate the public about steam locomotive operation and history. The locomotive has made a few historic appearances, such as being the first steam locomotive to operate in Port Huron, Michigan since the early 60s.